black dragon gold corp.: drilling identifies new high-grade extensions to salave gold resource - gps car alarm system

by:Kingcobra     2019-09-29
black dragon gold corp.: drilling identifies new high-grade extensions to salave gold resource  -  gps car alarm system
Cheltenham, England
Alternatively, they are pleased to announce the results of the analysis of the Company's wholly owned Salave Gold project 2018 in the Asuri Yas region in northern Spain for filling and defining the other three drilling holes in drilling activities (“ or the “).
Results of drilling BD18-
01, 02 and 03 are important because they are highly cross-crossed
Grade mineralization beyond current mineral resource model constraints, with depth and depth tilted to the west and northwest.
This confirms the great exploration potential of Salave's existing measurement and indication resource 6.
52 million tons at 4: 00.
51 grams/ton of gold, 944,000 ounces of gold (
See press release of February 2, 2017).
The results of these new drills are some of the highest.
Up to now, the grade intersection recorded by the project is expected to have a positive impact on the next mineral resource estimate, which will be completed by 2018 at the end of the third quarter/early fourth quarter.
2018 The main goal of the exercise plan is to confirm the high-
When the company is ready to conduct a preliminary economic assessment immediately, the gold mine grade of salawe (“PEA”)
Focus on the latest mineral resource assessment and the new underground mine plan.
Paul Cronin, CEO and managing director of Black Dragon, commented: the mineralisation interval was selected to reach the lowest level consistent with the mineral resource level considered appropriate for underground mining methods in the 2017 MDA mineral resource estimate.
The selected interval included above is based on 2. 5 g/t Au cut-
Minimum interval length of 2 m and maximum internal waste interval of 2 m.
The mineral width reported may not represent the true width.
According to the ERTS89 data, section 29N, measure the collar position in UTM coordinates-see Appendix 1.
2018 drill activity by 7 diamond holes (BD18-01-07)
A total of 2,117.
So far, the results of the BD18-hole have been received01 to 05.
BD18-results compilation and verification of holes06 and BD18-
The 07 is waiting and is expected to be reported in the coming weeks. Hole BD18-
05 did not reach the target in depth and was re-drilled BD18-07.
2018 exercise plan for the North
The west quadrant of the current resource model, designed to confirm with high-
Grade gold deposit and test possible lateral extension of plane to shallow West
The immersion stacking lens defined in the company's current mineral resources model.
The company will use the new information of 2018 drilling holes to update the current Salaway mineral resource estimates, which will be used as the basis for peas from the Salave underground mine and the ongoing feasibility study.
Previously released drilling results from BD18-holes04 and BD18-
05 summary is as follows (
For details, please see press release 14 2018 of April 14)
: Select the mineralisation interval to reach the lowest level consistent with the mineral resource level considered suitable for underground mining methods in the 2017 MDA mineral resource estimate.
The selected interval included above is based on 2. 5 g/t Au cut-
Minimum interval length of 2 m and maximum continuous internal waste interval of 2 m.
The mineral width reported may not represent the true width.
According to the ERTS89 data, section 29N, measure the collar position in UTM coordinates-see Appendix 1.
The Salaway deposit consists of a series of West-from horizontal to shallow-
Immersion lens related to alteration (
(Advanced Service)
The fault zone inside the sharawai granite.
The salad Granite is a big North-
West, about 500 wide, sharply tilted window sill-
Just like the body covered by the account on the west side of the deposit.
The contact between the account and the salad granite is roughly north-
To the east, gently to the north
West, approximately parallel to the inclination of the regional thrust fault and the sharaway deposit.
The formation of a mineralised lens for the contraction and expansion of Salave deposits, when these lenses appear to be combined or connected by a steep structure, this may become a feeder for the mineralisation in a shallow immersion mirror.
As the focus moves deeper in the sediment, the lens appears to shift and descend to the west, and collectively form a table area, immediately below, roughly parallel to the contact with the covered account.
Not only have drill holes BD18-
01 to 05 confirmed and filled the gold deposit area in the previous resource model, they are
In addition to the current resource model, in the case of depth and descent to the west, the grade interval of gold deposit.
2018 drilling times were recorded using a directional drill core.
This information will be used to complete a detailed structural study of 2018 in the fourth quarter, which will help explain the control high-
Gold grade area suitable for underground mining.
Santiago Gonzalez Nister
, Qualified personnel as defined in National Instrument 43-
101 and JORC 2012 define capable people.
Mr. Nikita, a consultant to the Black Dragon Company, supervised the diamond drilling project of the sarawai gold project and reviewed, verified and compiled the data reported in this article.
Douglas TurnbullGeo.
, Qualified personnel as defined in National Instrument 43-
The competent persons defined by 101 and JORC 2012 are advisers to the Black Dragon and have reviewed and approved scientific and technical disclosures in this press release.
The analytical work reported in this paper is carried out by the ALS Laboratory team. SL (“ALS”)
In Spain and Ireland.
ALS is ISO 17025-
2005 certified and international accredited analytical service providers.
All drill cores are recorded and sampled at their core storage facility in Tapia de Casariego.
The sample interval changes from 0. 85 to 2.
05 m, all cores were sawed apart, half were sawed apart, and the core samples for the first quarter were shipped to ALS in Seville.
The samples were crushed and crushed at ALS, and the gold in 50 gm samples was analyzed with fire analysis and AA finish.
The sample is also analyzed by four acid ICP-Analysis
AES of arsenic, antimony and sulfur.
The company follows industry standard procedures for quality assurance/quality control of the Salave Gold project (QA/QC)program.
Insert blank, repetitive, and standard samples into the sample sequence sent to the laboratory for analysis.
Black Dragon did not find major QA/QC issues when reviewing the data.
Black Dragon Gold
1000 Cathedral Square, 925 West Georgia Street, Vancouver, BC v6 c 3L2, Canada, T-
44 79934077 F-
Black Dragon Gold 44 20 71128814(ASX/TSXV: BDG)
It is 100% owner of Salave project, one of Europe's largest untapped gold projects.
Salaf is located in the province of asurias in northern Spain.
The Salave project has measured and displayed a total of 6 resources.
Class 4 52 million tons.
51 g/t Au, containing 944,000 ounces of gold, with a content of 2.
The deadline is 0 g/t and the price of gold is $1,100/ounce.
For more information on the Salave project, please refer to the revised technical report of October 7, 2016, "technical report on the revision of the Salave Gold project in the asurias region, Spain, January 31, 2017" and submit it on SEDAR, and posted on the company's website.
In addition to the current mineral resources, historical exploration work has shown the potential for further mineralization in the land reserve of the Black Dragon.
Black Dragon Gold (
BDG or "Company ")
The 2018 drilling scheme consists of 7 diamond drill cores with a total of 2,217 m PQ and HQ-sized drill cores. Hole BD18-
XX failed to reach the target depth due to drilling fluid problems, but the recovered core was sampled and reported.
2018 drilling is started with the core of PQ size, with variable depth, close to the new rock interface (16-61m)
Then the HQ size core in the fresh rock until the end of the hole.
The sample consists of quarterly cores with a length of mainly 1 to 2 m (
The average length of the sample is 1. 33m).
All core marks are cut along the directional core (
Producing core lengths for one and a half and two quarters)
According to the formation and change contact determined by geologists at the drilling site, the diamond is sawed into various lengths.
For all core sampling, the average sampling length of 2018 holes is 1. 33 m.
The drill core is used to obtain a drill core of PQ or HQ size, followed by a longitudinal cut using a diamond saw to obtain a quarterly drill core sample, which is crushed in a jaw crusher and then crushed in a ring crusher, generate 50 grams of fire-measured charge and 25 grams of charge for nearly four acid digestion of S, as and Sb analysis.
The sample interval interrupt is determined by a change in the type of change.
The grade of gold ore has a strong correlation with the type and intensity of transformation.
Special measures are not required to maximize recovery rates, and high recovery rates are provided by standard drilling practices.
Density measures were also taken.
The drill core is stored in the warehouse and logging facilities of the Black Dragon.
The level of detail captured in log data is considered to be the appropriate level to support resource estimates.
During the 2018 exercise, all cores were cut in half and a quarterly core analysis was conducted.
For the drilling movement of 2018, individual drill core samples are crushed to 70%
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...